20' x 31' Vertical Roof Metal Carport

20x31 Carport: Durable Metal Roof & Trim Options

Design in 3D

Add Optional Gable Or Extended Gable End

Choose Anchoring Surface & Method

Choose Side Panel/Wall Color

Choose Your Leg Height

Choose Your Roof Color

Choose Your Trim Color

Close One End To The Ground

Is Power Available For Use During Installation?

Optional 3' Panel Down The Open Sides

Or Close Both Sides To The Ground

Select Installation State For Final Price

Quantity :

Add to Wishlist

Ask a question

Product Details

20' X 31' A-FRAME METAL CARPORT (VERTICAL ROOF STYLE)

WITH 29 GAUGE VERTICAL ROOF - FREE INSTALLATION!*

Price Includes: Certification Package**, 31' Long Roof - 30' Long Frame, 6' Legs, 14 Gauge Galvanized Frame, Rebar or Concrete Anchors, All Legs/Bows 5' On Center, All Required Leg Bracing, & Center Brace On Every Bow. Center Height 8' 6".

We can make almost any custom configuration according to your needs & specifications, including specific widths, lengths, & more. You can select different wall heights, close walls, add windows, walk-in doors, lean-tos, & more while ordering. Choose from multiple colors for the roof, walls, & trim. Conveniently place your order below, or we can take it over the phone!

Order Online Or By Phone. You Will Get To Review & Approve Your Order Before It Is Finalized. Pay Only The Down Payment To Order. Balance Is Paid After The Installation. Call 1-800-324-5315 For Assistance With Your Order Or For Pricing In Other States.

Above Price Is Available In AL, AR, GA, IN, KY, LA, MS, NC, OK, SC, TN, TX, & VA Only

20' x 31' Metal Carport (Boxed Eave Roof) With 29 Gauge Vertical Metal Roof - Free Delivery & Installation!*

Price Includes: Certification Package**, 6' Legs, 14 Gauge Frame, Rebar Anchors or Concrete Anchors, All Legs/Bows 5' On Center, All Required Leg Bracing, & One Center Brace On Every Bow. Center Height 8' 6".

The Boxed Eave Style, (A-Frame Type), Metal Carport With The 29 Gauge Vertical Metal Roof has a more traditional look. The Vertical Roof Style is the strongest roof style available. On the Boxed Eave Style with the Vertical Roof, the Roof Panels are laid in a vertical orientation starting from the peak and ending at the eaves/sides, unlike the regular style and the boxed eave style where the roof panels are installed horizontally. This roof configuration displaces water, snow, etc., much more efficiently and water will not pond on the roof. The Vertical Roof Style also has 18 Gauge Hat-Channel "Purlins' running length-wise attached to the bows. This also makes the structure more sturdy with its added rigidity and strength. We highly recommend any Metal Structure longer than 31 feet be upgraded to the Vertical Roof Style to avoid any potential leaks at the seams. You may also want to order this style to more closely resemble other buildings on your property.

We also offer a variety of options with our Metal Carport (Boxed Eave Roof). You may want to consider the addition of a gable end to your carport, it makes the carport stronger & it also has a much nicer curb appeal. You then should consider purchasing additional leg height for more clearance, and/or panels down the side to keep the blowing rain off of your vehicles or equipment. You can also close one end and/or the sides to the ground and more while ordering.

We also offer a variety of options with our Vertical Roof Style Metal Carports. You may want to consider the addition of a gable end to your carport, it makes the carport stronger & it also has a much nicer curb appeal. You then should consider purchasing additional leg height for more clearance, and/or panels down the side to keep the blowing rain off of your vehicles or equipment. You can also close one end and/or the sides to the ground and more while ordering.

Why Pay Storage Fees? We Have Partnered With Major Lenders To Provide 100% Financing With Rates As Low As 5.99%. View finance offers online. Free Credit Score. Compare Offers From Top Lenders! Less Than Perfect Credit? Credit Approvals With FICOs AS Low As 600!

Order Your New Regular Style Enclosed Metal Building Today With Low Rates & 100% Financing!

Rent To Own This Steel Building Today With No Credit Check Or Credit Needed!

Also Available To All Land & Homeowners & Home Renters. Rent To Own this High Quality Sturdy Vertical Roof Metal Carport With No Credit Check! Rent To Own Programs are popular alternatives to commercial storage units. The price paid per square foot of storage space is competitive with self-storage rates. Rent to own is a smart choice for so many circumstances. You are not required to keep the building if the building becomes a financial burden, or for any reason, you no longer need the building. Your credit will remain safe and sound. Call 1-800-324-5315 For Full Details.

After placing your order in our system, you will promptly receive a comprehensive itemized order form via email. This document will include detailed information about your order, including options, colors, and the final balance due, including any applicable state or local sales taxes. At that time you will be able to securely pay the down payment to order. The order processing time typically ranges from 1 to 24 hours, depending on the time of day of the order.

You will be able to review the order, and will be able to make any needed revisions before finalizing your order.

Must Be In AL, AR, GA, IN, KY, LA, MS, NC, OK, SC, TN, TX, Or VA, And Be Within The Below Service Area For This Pricing.

Some Photos Are Illustrations.

*Price Includes Free Delivery & Installation in Most Areas Of The States Listed Under "Select Installation State For Final Price" In The Product Options Section. See the service map or call us for details.

**Many cities & counties require building certification. All certification is based on installation on an existing concrete slab with a proper footing or use of Optional Helical Anchors to a suitable surface on ground/asphalt. Must add optional helical anchors for certification on ground or asphalt. Free Generic Engineering Plans are available after purchase in most states we service. There is a charge for Site Specific Plans or Wet Seal Prints if Generic Plans are not available. All paid plans are paid in advance before the plans are released. The factory must receive your order to release the plans. Higher wind speed and/or higher snow load certification available if needed in most states we service for an additional charge. Certification and Warranties vary by manufacturer and region.

***Financing is with approved credit. Financing and Rent To Own are not available in all states. Call for details.

All Stated Dimensions Are Wide By Long.

The roof panels used are 29 Gauge Rolled, Rib-Formed, Locked Seam steel panels. Eagle uses Becker's Paint with a Beckrypol Coating System that has a bright and colorful finish, and is available in 14 color choices. Beckrypol is a complete coating system, consisting of a corrosion resistant primer with a durable exterior topcoat that has a functional backer. This coating system provides optimum balance between visual properties and long term performance.

On the Regular Style and the Boxed Eave Style the standard way the roof panels are installed is horizontally. When the roof panels are installed horizontally, the ridges of the steel panels run parallel to the sides and top ridge of the structure. Water, snow, etc., will drain to the front and back of the structure, and may tend to pond on the roof. The maximum length of a horizontal panel is 31'. Any structure over 31' in length will have two horizontal panels seamed together at some place. On the Boxed Eave Style the roof panels can be installed vertically for an additional charge. On the Box Eave Style with the roof panels installed vertically, the ridges of the roof panels run from the top ridge of the structure to the sides, and has "Purlins", (an additional frame running lengthwise), to attach the vertical roof panels to. This roof configuration displaces water, snow, etc., much more efficiently and water will not pond on the roof. We strongly recommends the vertical roof on all structures over 31'. Vertical Roof Structures could be up to one foot shorter than specified length.

The standard frame used is 14 Gauge 2 1/2 Inch Galvanized Steel Tubing certified for 30 PSF snow load and 140 MPH wind gust if properly anchored as described below. The standard spacing of the frame legs/bows is 5 feet on center. There may be a small charge for engineering plans in some states if needed.

There are three anchoring types used for installation. The standard concrete anchor used is a traditional concrete wedge type anchor. If anchored to a proper footing this way, the building will be certified. An optional helical mobile home anchor or asphalt anchor is used and required for ground installation to achieve certification on a dirt, asphalt, or a gravel surface. A 30 inch rebar anchor is used when a structure is mounted directly to a dirt, asphalt, or a gravel surface, and not needing certification.

Please insure that the site designated for installation is as flat and square a surface as possible. We do not build over any structure without damage waivers signed and extra labor fees charged. Make sure site is clear of any obstructions. In order to provide you with affordable products with free installation, site preparation as well as building permits, are the responsibility of the customer and must be done before installation is attempted. If the site is not level and square then the structure will have to be installed "As Is". We can not anchor to solid rock. The anchors must be able to go into the ground if not anchored on concrete. Call 1st if you have any concerns.

This is a special order. Please only order if you have done all due diligence and due process.

No refunds of the down payment can be given on cancellations for any reason. The down payment is the restocking fee and is not refundable for any reason. The customer is responsible for any local permits, covenant searches, rights of way, set-back restrictions, site preparation, city or county ordinances etc. Delivery and installation should be within 2 to 8 weeks from time of order in almost all cases. This is why only a small portion of the sales price, (10% - $595.00 to $1,999.00, 12% - $2.000.00 to $3,999.00, 15% - $4.000.00 to $4,999.00, and 16% - $5,000.00 and up), is required to order. The balance, (84% to 90% of the sales price, plus the sales tax), is only paid when the work has been completed and your product has been installed.

Some manufactures may charge a small convenience fee if balance is paid by credit or debit card.

To include installation at these prices we can only install the product the week we are installing products in your area, which could be on a two to four week rotation, depending the work level in the exact area of the installation. We will try to get your product installed as soon as possible. Installation delays may occur and will not justify a refund. No Exceptions.

Call Us At 1-800-324-5315 Monday - Friday, 8:30 AM - 7:00 PM & 9:00 AM - 3:00 PM Saturday Central Time, For A Free Custom Quote, Answers To Your Questions, Or Assistance With Your Order.