+1 (888) 522-6202
loading...
Metal Buildings 24' x 31' x 8' Vertical Roof Style
24" X 36" Window Installed
30" x 36" Window Installed
Add Or Change Doors
Choose Anchoring Surface & Method
Choose Wall Color
Choose Your Roof Color
Choose Your Trim Color
Is Power Available For Use During Installation?
Optional Vertical Sides And Ends
Select Installation State For Final Price
Wall Height Enclosed Garage
$9,605.00

Quantity :

Add to Wishlist
Share
Product Details

 

24' X 31' A-FRAME ENCLOSED METAL GARAGE (BOXED EAVE STYLE)

WITH 29 GAUGE VERTICAL ROOF - FREE INSTALLATION!*

Price Includes: 9' Side Walls, 31' Long Roof - 30' Long Building, Two 9' x 8' Roll-Up Garage Doors On One End, Certification Package**, 14 Gauge Galvanized Steel Frame, All Required Leg Bracing, Concrete or Rebar Anchors, All Bows/Legs Spaced 5' On Center, & Center Brace On Every Bow. Center Height 12' 0".

We can make almost any custom configuration according to your needs & specifications, including specific widths, lengths, & more. You can select different wall heights, add windows, walk-in doors, add lean-tos, & more while ordering. Choose from multiple colors for the roof, wall, & trim. Conveniently place your order below, or we can take it over the phone!

 

Order Online Or By Phone. You Will Get To Review & Approve Your Order Before It Is Finalized. Pay Only The Down Payment To Order. Balance Paid At Installation. Call 1-800-324-5315 For Assistance With Your Order Or For Pricing In Other States.

 
Free Shipping
Above Price Is Available In AL, AR, GA, IN, KY, LA, MS, NC, OK, SC, TN, TX, & VA Only
 

24' x 31' Boxed Eave Style Fully Enclosed Steel Building With 29 Gauge Vertical Roof - Free Delivery & Installation!*

Price Includes: 9' Walls, Two 9' x 8' Roll-Up Garage Doors, Certification Package**, 14 Gauge Frame, One 3' Brace On Every Leg, Concrete or Rebar Anchors, Bows/Legs 5' On Center, & One Center Brace On Every Bow. Center Height 12' 0".

The Boxed Eave Style, (A-Frame Type), Steel Metal Building With The 29 Gauge Vertical Metal Roof has a more traditional look. The Vertical Roof Style is the strongest roof style available. On the Boxed Eave Style with the Vertical Roof, the Roof Panels are laid in a vertical orientation starting from the peak and ending at the eaves/sides, unlike the regular style and the boxed eave style where the roof panels are installed horizontally. This roof configuration displaces water, snow, etc., much more efficiently and water will not pond on the roof. The Vertical Roof Style also has 18 Gauge Hat-Channel "Purlins' running lengthwise attached to the bows. This also makes the structure more sturdy with it's added rigidity and strength. We highly recommend any Metal Structure longer than 31 feet be upgraded to the Vertical Roof Style to avoid any potential leaks at the seams. You may also want to order this style to more closely resemble other buildings on your property.

We also offer a variety of options with our Vertical Roof Style Steel Metal Buildings. You can select wall height up to 14', add windows, walk-in doors, and more while ordering. You can select from 14 color choices for the roof, walls, and trim colors. We can also build custom configurations according to your needs & specifications, including different size roll-up doors, roll-up doors on the side, specific widths, lengths, & more.

 

We offer standard size Vertical Roof Style Enclosed Garages to save you time & money. They are priced 12' wide, 18' wide, 20' wide, 22' wide, & 24' wide, & in lengths they are priced 21' long, 26' long, 31' long, 36' long, & 41' long. We can build any custom size in between these sizes. Any custom size is priced the same as the next size up. I.e. a 23' wide is priced the same as a 24' wide, a 29' long would be priced the same as a 31' long, etc.

Why Pay Storage Fees? We Have Partnered With Major Lenders To Provide 100% Financing With Competitive Rates. View finance offers online. Free Credit Score. Compare Offers From Top Lenders! Less Than Perfect Credit? Credit Approvals With FICOs AS Low As 600!

Order Your New Regular Style Enclosed Metal Building Today With Low Rates & 100% Financing!

Rent To Own This Vertical Roof Enclosed Garage Today With No Credit Check Or Credit Needed!

 

Also Available To All Land & Homeowners & Home Renters. Rent To Own this High Quality Vertical Roof Enclosed Metal Garage With No Credit Check! Rent To Own Programs are popular alternatives to commercial storage units. The price paid per square foot of storage space is competitive with self-storage rates. Rent to own is a smart choice for so many circumstances. You are not required to keep the building if the building becomes a financial burden, or for any reason, you no longer need the building. Your credit will remain safe and sound. Call 1-800-324-5315 For Full Details.

After placing your order in our system, you will promptly receive a comprehensive itemized order form via email. This document will include detailed information about your order, including options, colors, and the final balance due, including any applicable state or local sales taxes. At that time you will be able to securely pay the down payment to order. The order processing time typically ranges from 1 to 24 hours, depending on the time of day of the order.

You will be able to review the order, and will be able to make any needed revisions before finalizing your order.

Must Be In AL, AR, GA, IN, KY, LA, MS, NC, OK, SC, TN, TX, Or VA, And Be Within The Below Service Area For This Pricing.
Some Photos Are Illustrations.

*Price Includes Free Delivery & Installation in Most Areas Of The States Listed Under "Select Installation State For Final Price" In The Product Options Section. See the service map or call us for details.

**Many cities & counties require building certification. All certification is based on installation on an existing concrete slab with a proper footing or use of Optional Helical Anchors to a suitable surface on ground/asphalt. Must add optional helical anchors for certification on ground or asphalt. Free Generic Engineering Plans are available after purchase in most states we service. There is a charge for Site Specific Plans or Wet Seal Prints if Generic Plans are not available. All paid plans are paid in advance before the plans are released. The factory must receive your order to release the plans. Higher wind speed and/or higher snow load certification available if needed in most states we service for an additional charge. Certification and Warranties vary by manufacturer and region.

***Financing is with approved credit. Financing and Rent To Own are not available in all states. Call for details.

 

All Stated Dimensions Are Wide By Long.

The roof panels used are 29 Gauge Rolled, Rib-Formed, Locked Seam steel panels. Eagle uses Becker's Paint with a Beckrypol Coating System that has a bright and colorful finish, and is available in 14 color choices. Beckrypol is a complete coating system, consisting of a corrosion resistant primer with a durable exterior topcoat that has a functional backer. This coating system provides optimum balance between visual properties and long term performance.

On the Regular Style and the Boxed Eave Style the standard way the roof panels are installed is horizontally. When the roof panels are installed horizontally, the ridges of the steel panels run parallel to the sides and top ridge of the structure. Water, snow, etc., will drain to the front and back of the structure, and may tend to pond on the roof. The maximum length of a horizontal panel is 31'. Any structure over 31' in length will have two horizontal panels seamed together at some place. On the Boxed Eave Style the roof panels can be installed vertically for an additional charge. On the Box Eave Style with the roof panels installed vertically, the ridges of the roof panels run from the top ridge of the structure to the sides, and has "Purlins", (an additional frame running lengthwise), to attach the vertical roof panels to. This roof configuration displaces water, snow, etc., much more efficiently and water will not pond on the roof. We strongly recommends the vertical roof on all structures over 31'. Vertical Roof Structures could be up to one foot shorter than specified length.

The standard frame used is 14 Gauge 2 1/2 Inch Galvanized Steel Tubing certified for 30 PSF snow load and 140 MPH wind gust if properly anchored as described below. The standard spacing of the frame legs/bows is 5 feet on center. There may be a small charge for engineering plans in some states if needed.

There are three anchoring types used for installation. The standard concrete anchor used is a traditional concrete wedge type anchor. If anchored to a proper footing this way, the building will be certified. An optional helical mobile home anchor or asphalt anchor is used and required for ground installation to achieve certification on a dirt, asphalt, or a gravel surface. A 30 inch rebar anchor is used when a structure is mounted directly to a dirt, asphalt, or a gravel surface, and not needing certification.

Please insure that the site designated for installation is as flat and square a surface as possible. We do not build over any structure without damage waivers signed and extra labor fees charged. Make sure site is clear of any obstructions. In order to provide you with affordable products with free installation, site preparation as well as building permits, are the responsibility of the customer and must be done before installation is attempted. If the site is not level and square then the structure will have to be installed "As Is". We can not anchor to solid rock. The anchors must be able to go into the ground if not anchored on concrete. Call 1st if you have any concerns.

This is a special order. Please only order if you have done all due diligence and due process.

No refunds of the down payment can be given on cancellations for any reason. The down payment is the restocking fee and is not refundable for any reason. The customer is responsible for any local permits, covenant searches, rights of way, set-back restrictions, site preparation, city or county ordinances etc. Delivery and installation should be within 2 to 8 weeks from time of order in almost all cases. This is why only a small portion of the sales price, (10% - $595.00 to $1,999.00, 12% - $2.000.00 to $3,999.00, 15% - $4.000.00 to $4,999.00, and 16% - $5,000.00 and up), is required to order. The balance, (84% to 90% of the sales price, plus the sales tax), is only paid when the work has been completed and your product has been installed.

 


Some manufactures may charge a small convenience fee if balance is paid by credit or debit card.

To include installation at these prices we can only install the product the week we are installing products in your area, which could be on a two to four week rotation, depending the work level in the exact area of the installation. We will try to get your product installed as soon as possible. Installation delays may occur and will not justify a refund. No Exceptions.

Call Us At 1-800-324-5315 Monday - Friday, 8:30 AM - 7:00 PM & 9:00 AM - 3:00 PM Saturday Central Time, For A Free Custom Quote, Answers To Your Questions, Or Assistance With Your Order.
People Also Viewed